Skip to Content

Santoku, 80CrV2 Core with Wrought Iron Cladding, Teak Handle and Copper Ferrule

A santoku with an 80CrV2 core and wrought iron cladding, forged by hand in Groningen. A santoku is a Japanese all-purpose kitchen knife. The outer layers are wrought iron, an old low-carbon iron with a visible grain, around a steel core. The surface is raw and a little pitted, and the iron darkens with use. The handle is teak with a copper ferrule.

Care

Wash by hand and dry the knife after use, with the cotton cloth it came in or a dishcloth. Carbon steel can rust and discolour. The darker layer that forms is called patina, and it protects the steel and gives your knife its character. Never leave acids on the blade, they discolour it and destroy the patina. Hone the edge with a honing steel just before or right after use.

350.00 € 350.00 €

  • Steel
  • Handle
  • HRC
  • Ferrule
  • Finish
  • Overall length
  • Tip to handle
  • Edge length
  • Heel height
  • Handle length
  • Blade thickness
  • Weight
Terms and Conditions
Return within 14 days in the same condition
Shipping: 2-3 Business Days

Specifications

Steel 80CrV2 core (80CrV2 about 0.8% carbon, 0.5% chromium, 0.2% vanadium) with wrought iron cladding (wrought iron: under 0.1% carbon, about 2% slag)
Handle Teak (Janka hardness about 1,070 lbf, density about 650 kg/m3)
HRC 59-60
Ferrule Copper
Finish Etched
Overall length 297 mm
Tip to handle 162 mm
Edge length 160 mm
Heel height 57 mm
Handle length 135 mm
Blade thickness 3.2 mm above the heel, tapering to 0.8 mm at the tip
Weight 139 g