Skip to Content

Big Birtha, 80CrV2 Core with 15N20 Cladding, Pao Rosa Handle

A big, heavy chef's knife, forged by hand in Groningen. The core is 80CrV2 between two layers of 15N20. That is san mai, three layers: the hard core takes the edge, the outer layers keep the blade tough. I forged it to act more like a cleaver, so the weight sits toward the front, and it has a nice taper. The handle is pao rosa, a hardwood with a pink-red tone, with a brass ferrule. This knife is not for small hands.

Care

Wash by hand and dry the knife after use, with the cotton cloth it came in or a dishcloth. Carbon steel can rust and discolour. The darker layer that forms is called patina, and it protects the steel and gives your knife its character. Never leave acids on the blade, they discolour it and destroy the patina. Hone the edge with a honing steel just before or right after use.

400.00 € 400.00 €

  • Steel
  • Handle
  • HRC
  • Ferrule
  • Finish
  • Overall length
  • Tip to handle
  • Edge length
  • Heel height
  • Handle length
  • Blade thickness
  • Weight
Terms and Conditions
Return within 14 days in the same condition
Shipping: 2-3 Business Days

Specifications

Steel 80CrV2 core + 15N20 cladding, san mai (80CrV2 about 0.8% carbon, 0.5% chromium, 0.2% vanadium; 15N20 about 2% nickel)
Handle Pao rosa (density about 1,000-1,100 kg/m3)
HRC 59-60
Ferrule Brass
Finish Dark Etched San Mai
Overall length 330 mm
Tip to handle 204 mm
Edge length 198 mm
Heel height 53 mm
Handle length 126 mm
Blade thickness 5.7 mm above the heel, tapering to 0.8 mm at the tip
Weight 215 g