Skip to Content

Chef's Knife, 80CrV2 Core with 15N20 Cladding, Teak and African Blackwood Handle

A chef's knife with an 80CrV2 core and 15N20 cladding, forged by hand in Groningen. That is san mai, three layers: the hard core takes the edge, the outer layers keep the blade tough. 15N20 stays bright in the etch while the 80CrV2 turns dark, which shows the layers. The handle is teak and African blackwood, which is almost black, with an African blackwood ferrule. They work well together against the layered steel.

Care

Wash by hand and dry the knife after use, with the cotton cloth it came in or a dishcloth. Carbon steel can rust and discolour. The darker layer that forms is called patina, and it protects the steel and gives your knife its character. Never leave acids on the blade, they discolour it and destroy the patina. Hone the edge with a honing steel just before or right after use.

400.00 € 400.00 €

  • Steel
  • Handle
  • HRC
  • Ferrule
  • Finish
  • Overall length
  • Tip to handle
  • Edge length
  • Heel height
  • Handle length
  • Blade thickness
  • Weight
Terms and Conditions
Return within 14 days in the same condition
Shipping: 2-3 Business Days

Specifications

Steel 80CrV2 core + 15N20 cladding, san mai (80CrV2 about 0.8% carbon, 0.5% chromium, 0.2% vanadium; 15N20 about 2% nickel)
Handle Teak (Janka hardness about 1,070 lbf, density about 650 kg/m3) & African blackwood (Janka hardness about 3,670 lbf, density about 1,270 kg/m3)
HRC 59-60
Ferrule African Blackwood
Finish Dark Etched San Mai
Overall length 358 mm
Tip to handle 234 mm
Edge length 220 mm
Heel height 48 mm
Handle length 124 mm
Blade thickness 2.1 mm above the heel, tapering to 0.7 mm at the tip
Weight 152 g